PowerSlide Racing
Largest Range and Best Prices in Australia



RC Innovations
NZ's Premier Large Scale Shop



Predator RC




Radical Hobbies
Sydney's Best Large Scale Shop



Aussie Hobbies
QLD Hobby Shop



Baja Hop Ups Specialist



MCD Racing Forum




Nutech Racing Forum
« previous next »
Pages: [1] 2 3 ... 33

Author Topic: Senad Filter  (Read 15020 times)

0 Members and 1 Guest are viewing this topic.

senad

  • Trade Count: (6)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1141
Senad Filter
« on: September 30, 2011, 02:52:43 pm »
OK guys here are some pics of the first few pre-production filter assemblies. Just bear in mind that i have not yet received the bolts that bind the filter together, they will come next week so the bolts you see sticking out of the back plate are there only to hold the compression tubes in place for the sake of inspection and photos.

I must say i am very happy with the assembly itself, it is rock solid and doesnt distort the element in any way whilst still providing even downward forces accross the whole filter element for a good seal. One thing i am not is very imaginative when i comes to names, so i called it SENAD  :rolleyes:

I have put some installation instructions together for the filters in the link below, as well as an install video.
www.elecon.com.au/senad_filter.pdf

Senad Filter Unit Installation Video - Baja 5b



Hope you guys like it and any feedback would very much be appreciated.



« Last Edit: January 10, 2012, 11:22:53 pm by Bajaman »
Logged

Harks76

  • Trade Count: (13)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 3389
  • Age: 36
  • Location: Sydney
  • Your Shout
Re: Senad Filter
« Reply #1 on: September 30, 2011, 02:53:56 pm »
Very nice mate, Look forward to getting mine
Logged

Sig by DVP

RutCutter

  • Trade Count: (18)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1946
  • Location: Brisbane
Re: Senad Filter
« Reply #2 on: September 30, 2011, 03:01:39 pm »
though about the shops you would want to stock with this great product Senad.
Logged

Ajaprod b4.0 Losi Buggy
Big Thanks to my Supporters
King Rc www.KingRc.com.au
Vertigo Performance www.Vertigoperformance.com

Craig#991

  • Trade Count: (28)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 7406
  • Age: 42
  • Location: With ya Mum
  • F.I.G.J.A.M Racing
Re: Senad Filter
« Reply #3 on: September 30, 2011, 03:07:05 pm »
Very Nice Senad  8), Put me down for a couple please  ;).

One thing though. I prefer "Senad built" to just SENAD  :D.
Logged
I support Power Slide Racing, Sonic Racing Australia, AC Boats Australia and Redline Enterprises.

Engine work by Senad

Custom paint by KLHconcepts

v8hatch

  • Trade Count: (5)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 2192
Re: Senad Filter
« Reply #4 on: September 30, 2011, 03:09:18 pm »
Quote from: Craig#991 on September 30, 2011, 03:07:05 pm
Very Nice Senad  8), Put me down for a couple please  ;).

One thing though. I prefer "Senad built" to just SENAD  :D.

I agree!!!!
Logged

Johnseeone

  • Trade Count: (26)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 2478
  • Age: 29
  • Location: Down in the South
  • IVE GOT GAS!
    • JOHNSEEONE'S 5B
Re: Senad Filter
« Reply #5 on: September 30, 2011, 03:09:31 pm »
Nice looking good!
Logged
Signature by Ozzy Mozzy :good:
.S.A.L.S.MEMBER.#26.                           
.HPI.BAJA.5B-PS27.2s-OLIMAT.

senad

  • Trade Count: (6)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1141
Re: Senad Filter
« Reply #6 on: September 30, 2011, 03:35:45 pm »
Thanks guys, there will be plenty to go around thats for sure. I reckon this system is the best filter setup period and really all credit should go to Threshold for being ingenious enough to come up with it in the first place, i have just taken some of the kinks out of the original design and feel that it is a better system for it.

I am not sure if any of the shops would be interested in carrying it, but if they are i will make them available.

Hmmm.....Senad Built.......i'll stew over that one over the weekend Craig, what do you guys think?

Just something else, there will be another piece made that will allow these filters to be used on side mounted engines, heli's, planes, on road cars etc where traditionally this filter wouldnt work. The part will be multi positional so the filter assembly could fit almost anywhere even in a Losi truck  :D

Logged

Craig#991

  • Trade Count: (28)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 7406
  • Age: 42
  • Location: With ya Mum
  • F.I.G.J.A.M Racing
Re: Senad Filter
« Reply #7 on: September 30, 2011, 03:39:05 pm »
Your engines are already refered to as a "Senad Built" engine anyway  :P  :D.
Logged
I support Power Slide Racing, Sonic Racing Australia, AC Boats Australia and Redline Enterprises.

Engine work by Senad

Custom paint by KLHconcepts

bennyd

  • Trade Count: (3)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1856
  • Age: 32
  • Location: Underground
  • HAVE YOU INSTALLED YOU'RE MAINFOLD?
    • Oz Large Scale
Re: Senad Filter
« Reply #8 on: September 30, 2011, 03:40:28 pm »
I like "Senad Built" too, and look forward to grabbing at least 1 :)
Logged

Signature by Redline :good:

SALS Member No. 24

MCD V4RR Competition

BeatsMe

  • Trade Count: (7)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1540
  • Location: Sydnnneeyy
Re: Senad Filter
« Reply #9 on: September 30, 2011, 03:44:26 pm »
Nice work Senad... and i agree with the name "Senad Built" sounds good.

Just thinking i should just grab one set too.
Logged

senad

  • Trade Count: (6)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1141
Re: Senad Filter
« Reply #10 on: September 30, 2011, 03:45:34 pm »
Quote from: Craig#991 on September 30, 2011, 03:39:05 pm
Your engines are already refered to as a "Senad Built" engine anyway  :P  :D.

Yes mate I have noticed that to be the case, probably makes sense, as i said i am not that imaginative with names.

Quote from: bennyd on September 30, 2011, 03:40:28 pm
I like "Senad Built" too, and look forward to grabbing at least 1 :)

Quote from: BeatsMe on September 30, 2011, 03:44:26 pm
Nice work Senad... and i agree with the name "Senad Built" sounds good.

Just thinking i should just grab one set too.

You guys are slowly twisting my arm  :lol: :lol:
Logged

El barto

  • Trade Count: (3)
  • Elite Basher
  • ****
  • Posts: 472
Re: Senad Filter
« Reply #11 on: September 30, 2011, 03:48:30 pm »
I can't wait to read the comments the guys on HBF are going to make once they see it,...you are going to cope it big time or get plenty of orders.. :rolleyes:
Logged

senad

  • Trade Count: (6)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1141
Re: Senad Filter
« Reply #12 on: September 30, 2011, 04:05:37 pm »
You know what Phil, i dont really give a toss, but yes we'll see what happens with that. I dont go on there much anymore.
Logged

Craig#991

  • Trade Count: (28)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 7406
  • Age: 42
  • Location: With ya Mum
  • F.I.G.J.A.M Racing
Re: Senad Filter
« Reply #13 on: September 30, 2011, 04:08:33 pm »
Not like you didn't wait 12 months for Threshold to bring some more out. If he's not interested his loss will be your Gain  8).

+ According to HBF you only need to make slight changes for it not to be a clone anyway  :rolleyes:. They don't want them then It's their loss  :P.
« Last Edit: September 30, 2011, 04:11:33 pm by Craig#991 »
Logged
I support Power Slide Racing, Sonic Racing Australia, AC Boats Australia and Redline Enterprises.

Engine work by Senad

Custom paint by KLHconcepts

senad

  • Trade Count: (6)
  • Hard Core 1/5th Nut
  • *****
  • Posts: 1141
Re: Senad Filter
« Reply #14 on: September 30, 2011, 04:16:00 pm »
I agree with you Craig, but its everyones gain cause it eliminates crud getting into these engines. In my mind the filter is one of the most important parts, you can have all the bling but if the engine is sanded it aint much fun when it goes nowhere - unless your into shelf queens that is  :D
Logged
Pages: [1] 2 3 ... 33
« previous next »